What are the exact external dimensions of this table?
Manufacturer catalogue specifications list this unit as having a standard footprint of 120cm in length, 60cm in depth, and 42cm in height. The sintered stone top is a single slab that measures 120cm by 60cm, with a thickness of approximately 2cm. The wood base is engineered to maintain structural integrity while reducing overall weight, allowing the finished piece to weigh between 45kg and 50kg, including the built-in drainage tray assembly. When you measure your space in a typical Singapore HDB flat, you must account for the clearance required around the table. A minimum clearance of 40cm is recommended on all sides for comfortable movement and access to the tea station drainage area. If your living room is only 3.5m wide, this 120cm table will occupy 34% of the total width, leaving 2.3m for the sofa and circulation space. This dimension is critical for owners of compact 2-bedroom units in the Punggol or Sengkang estates where every centimetre of usable floor area is optimised for storage and movement.
Does the 120cm length fit a standard 49 sqm HDB living room?
Most standard 49 sqm HDB flats, such as those in Tampines or Jurong West, have a living room dimension of approximately 3.8m by 3.2m. Placing a 120cm table against the 3.2m wall leaves 2m of clearance. This is sufficient for a 2-seater sofa placed opposite the table, provided the sofa depth does not exceed 90cm. However, if you plan to place a 3-seater sofa directly opposite the table, the distance between the sofa arm and the table edge will be approximately 80cm to 90cm. This is tight for pouring tea from the built-in station. For larger 5-bedroom executive flats, the living area often spans 6m or more, meaning the 120cm table may feel small and visually disproportionate. It is a size tailored specifically for 2 and 3-bedroom layouts where space efficiency is the priority. In a 2-bedroom flat with a combined dining and living area, you might need to slide the table slightly to accommodate a dining set, but the 120cm length allows it to double as a low dining surface for up to four people without blocking the walkway to the kitchen.
Can the table fit through standard Singapore condo lift doors?
Entry logistics are a major constraint in Singapore condos. Standard residential lift doors measure 80cm to 90cm in width. The table is designed for flat-packing, but the sintered stone top is a rigid piece measuring 120cm by 60cm. You cannot fold this top. Therefore, you must check if the stone slab can pass through your building lift diagonally. The diagonal of a 120cm by 60cm slab is approximately 134cm. Most lift cars are 100cm wide and 140cm deep. If your condo lift is smaller, which is common in older projects in the CBD or Marina Bay, the stone top may not fit through the car doors. You will likely need to use the service lift or the main entry staircase. The wood base components are modular and can be stacked. We recommend verifying your specific building’s lift dimensions before finalising a purchase. For ground-floor units or those with direct car park access, this is less of an issue. For high-floor units, plan for a two-person lift job or check if your building allows for the use of the service lift, which typically has wider doors accommodating furniture up to 150cm in height or width.
How does the 42cm height compare to standard coffee table standards?
The standard coffee table height in Singapore interior design is typically 40cm to 45cm. This unit sits at 42cm, which is the median point. This height is ideal for matching with sofas that have a seat height of 45cm. It allows your knee to rest comfortably on the table surface if you choose to lounge. For the tea function, 42cm is also ergonomic for pouring from a teapot held in the hand. The built-in tea station is flush-mounted, meaning the basin sits level with the sintered stone surface. The drainage hole is located at one end, typically the right side when facing the table. You need to ensure that the 42cm height aligns with your sofa cushion level. If your sofa is lower, say 40cm, the table may feel slightly high for tea service. If your sofa is higher, say 48cm, the table will be comfortably low. This standard height ensures that the table works with most pre-fab furniture available at local retailers.
What is the weight limit for the top and the tea station?
The sintered stone top is rated to support up to 200kg of static load. This is well above the weight of standard decor items. The built-in tea station and drainage tray are designed to handle liquid water without saturating the underlying wood base. The wood base is treated with moisture-resistant varnish, which is crucial for Singapore’s high humidity. The total weight of the table is around 48kg. This is heavy enough to be stable on smooth HDB flooring but light enough for two people to move. You can reposition the table within the room to optimise space during monsoon seasons when you might want to keep it away from window leaks. The 48kg weight prevents tipping when leaning forward to pour tea. It is significantly lighter than solid marble, which would weigh over 100kg for the same dimensions, making this sintered stone alternative a smart choice for small footprints where you may need to move the table for cleaning or rearranging furniture.
Is the assembly difficulty suitable for DIY in Singapore?
The assembly involves attaching the sintered stone top to the wood base legs. This is a two-person job. You need to align the four mounting points and secure them with the provided hardware. The process takes approximately 30 to 45 minutes. You do not need any power tools, only the included Allen keys. The main challenge is lifting the 120cm stone slab onto the base. Because the slab is rigid, you need to coordinate your lift to avoid dropping it. If you are in a high-rise condo, you should assemble the legs on the base first, then carry the base and the top separately to the living room, and connect them there. The weight distribution is even, so once connected, it is stable. The tea station parts are pre-installed in the top, so you only need to plug in the drainage hose if it is not integrated into the floor. For most HDB flats, you will install the drain plug into a sink or use a catch basin on the floor, which is a simple setup that takes 5 minutes. No professional installation is required, saving you S$100 to S$200 in service fees.
How does the design handle Singapore humidity and monsoon leaks?
Sintered stone is non-porous and inert, meaning it does not absorb moisture or bacteria. This is a significant advantage over natural marble, which can etch or stain in humid conditions. The wood base is sourced from stable hardwoods that have been kiln-dried and sealed. The 2cm thickness of the stone top provides a thermal buffer, keeping the surface cool during tropical afternoons. In the monsoon season, from November to February, rain can blow under eaves and reach lower windows. If the table is near a window, the sintered surface will resist any water damage that might warp a particleboard base. The drainage system in the tea station ensures that any spilled tea is channeled away from the wood structure. The flush-mounted design means no water pools on the surface. For households in coastal areas like East Coast or Sentosa, where salt air might affect finishes, the sintered stone is impervious to corrosion. This makes it a durable choice for long-term use in Singapore’s tropical climate.
Does the table fit a 1-bedroom condo of 42 sqm?
A 1-bedroom condo in areas like Bedok or Choa Chu Kang often has a combined living-dining space of about 18 to 20 sqm. A 120cm by 60cm table has an area of 0.72 sqm. This takes up 3.6% to 4% of the floor area, which is acceptable. However, the length is the limiting factor. If the room is only 2.5m wide, the 120cm table leaves 1.3m for the sofa and movement. This is tight but workable if the sofa is 80cm deep. You will have 50cm of clearance for walking. For a compact 1-bedroom, a 100cm table might be better, but this 120cm unit offers the full tea station experience. If you have a sofa that slides against the wall, the 60cm depth of the table ensures it does not block the sofa. The 120cm length allows the table to extend into the open space, functioning as a divider between the dining and living zones. In a 42 sqm unit, this table acts as a multi-functional island.
What are the maintenance requirements for the black and white marble look?
The black and white sintered stone surface mimics the veining of natural marble but is more durable. You do not need to seal the stone. Wipe spills with a dry cloth. The 2cm thickness means the surface is resistant to scratching from metal utensils. The wood base should be wiped with a damp cloth, but not soaked. The tea station drainage requires monthly cleaning to prevent odor. You can remove the drainage plug and flush it with water. The black and white colour scheme is practical; minor dust is less visible on the white than on pure black, and tea stains are easier to spot on the sintered surface. The wood base is finished in a matte neutral tone, which blends with HDB parquet flooring. The 120cm width ensures that the pattern on the stone does not look repetitive. It is a low-maintenance piece that suits the busy lifestyle of Singaporean professionals who do not have time for daily polishing.
Can the table be used in a MIDHILL studio apartment?
For a studio apartment, space is at a premium. The 120cm length might be too long if the room is under 3m wide. However, if the studio is 3.5m wide, the 120cm table can serve as the main desk or dining table. The 42cm height is suitable for sitting on a sofa bed or a floor cushion. The light weight of 48kg allows you to slide the table to create a 2m square open space for yoga or cleaning. The tea station is a luxury in a small space, as it eliminates the need for a separate kitchen counter for brewing. You can place the table against the window for natural light. The sintered stone top reflects light, making the small room feel brighter. In a MIDHILL studio, you would likely use the table as a multi-functional centre. The 120cm footprint is manageable if you clear the immediate perimeter. It is not a bulk furniture item; it is a streamlined piece that maximises utility in a small footprint.
What is the price comparison with similar imports?
At S$3,090, this table is priced in the mid-premium segment. A natural marble table of the same size would cost S$4,500 to S$6,000. A solid wood table with a basic finish costs S$1,200 to S$1,800. The sintered stone option offers a balance of aesthetic value and durability. The built-in tea station adds functional value that would cost S$500 to S$800 to add as an accessory. The total value proposition is strong for those who want a dual-purpose furniture piece. The price includes free shipping within Singapore for HDB and condo units below the 10th floor, where a crane is not required. For higher floors, a S$50 to S$100 surcharge may apply. This is a competitive price point for a piece that combines three functions: coffee table, dining table, and tea station. It is an investment that reduces the need for multiple furniture items, saving space and cost in the long run.